{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling XDLW 120408 SR, for FeedKing HPC mills, HB4025
Article no.: 2159253
Catalog no.: 212971
Article code:
Product details
Technical Data
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth, Side milling | 1.8 mm | |
| Max. cutting depth, Full slot milling | 1.8 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | XDLW 120408 SR | |
| Base form | base profile X | |
| Thickness of insert S | 4.76 mm | |
| Height of cutting edge | 4.76 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner radius R | 0.8 mm | |
| Rake face chamfer width C | 20 mm | |
| Rake face chamfer angle | 15 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| ISO-Code | XDLW 120408 SR | |
| Attachment hole diameter | 5.4 mm | |
| Cutting depth ap, min. | 0.15 mm | |
| Cutting depth ap, max. | 1.8 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 1 mm | |
| Tool material | Carbide | |
| Machining group, manufacturer-specific | P | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | HB4025 | |
| Coating | CVD | |
| Grade | HB4025 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | XDLW 120408 SR | |
| Type of product | cutter insert | |
| with ISO code | yes | |
| Number of cutters | 4 pcs. | |
| suitable for material | steel (P) | |
| Tolerance class | L | |
| Machining strategy | HPC | |
| Type of fastening | hole | |
| Cutter version | chamfered and rounded (S) | |
| Number of potential uses | 4 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 2159253 | |
| Catalog number | 212971 | |
| EAN / GTIN | 4069515023290 | |
| Manufacturer number | 212971 ST1400 | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
180
P
160
Description
Note:
Standard application values for ae = 0.5 … 1×D / ap max
Downloads & documents
Suitable products
Services & product advisors
More search terms & categories
Tool material:
Carbide
Coating:
CVD
Type of product:
cutter insert
Machining strategy:
HPC
Category:
Indexable inserts for grooving tools
Category:
Indexable inserts for longitudinal turning tools & face turning tools
Category:
Indexable inserts for high feed rate milling cutter
Category:
Indexable inserts for side milling cutters & parting off milling cutters
Brand:
GARANT