{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning WNMG 060404, for finish machining, Wiper
Article no.: 2159313
Catalog no.: 251953
Article code:
New product
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | WNMG 060404 Wiper | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | triangular, with enlarged corner angles | |
| Thickness of the insert S | 4.76 mm | |
| Length of cutting insert L | 11.941 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 7.2 mm | |
| Diameter of the cutting insert d | 9.525 mm | |
| Corner radius R | 0.4 mm | |
| Corner angle | 80 degrees | |
| Rake angle | 18 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| ISO-Code | WNMG060404 | |
| Attachment hole diameter | 3.81 mm | |
| Type of chip breaker | WSS | |
| Tool material | Carbide | |
| Standard designation for cutting medium, 2nd Priority | HC-P20 | |
| Standard designation for cutting medium, 3rd Priority | HC-P20 | |
| Machining group, manufacturer-specific | P20 | |
| Machining group | P (steel) | |
| Tool application group | P20 | |
| Cutting media, manufacturer’s designation | HB7020-2 | |
| Coating | TiCn-Al2O3 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | WNMG060404 | |
| Interface coding for insert according to ISO TS 13399-60 | WNMG060404 | |
| Insert designation | WNMG060404 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Machining method | grooving and parting off (EEA) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 6 pcs. | |
| Weight | 65 g | |
| Content | 10 pcs. |
Identification & Classification
| Article number | 2159313 | |
| Catalog number | 251953 | |
| EAN / GTIN | 4069515018401 | |
| Manufacturer number | 251953 HB7020-2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
P
P
P
P
