{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap 6G, vaporised, M: M12
Article no.: 215976
Catalog no.: 135600
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 9 mm | |
| Length of shank LS | 93 mm | |
| Thread type | M | |
| Nominal diameter of metric thread D | 12 mm | |
| Thread D | M12 | |
| Thread pitch | 1.75 mm | |
| Thread tolerance class | 6G | |
| Length of tapping part Lc | 17 mm | |
| Tap infeed length | 5.25 mm | |
| Taper lead angle | 15 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Twist angle | 40 degrees | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | C | |
| Application for type of drilling | blind hole | |
| To depth (x diameter) | 2 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 10.2 mm | |
| Flank angle | 60 degrees | |
| Square-drive width across flats □ | 7 mm | |
| Tool material | HSS-E | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Coating | vaporised | |
| Interface | joint 1 | |
| Gauge length A | 110 mm | |
| Overall length L | 110 mm | |
| Weight | 75 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 376 | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | blue | |
| Type of product | taps | |
| Content | single part |
Identification & Classification
| Article number | 215976 | |
| Catalog number | 135600 | |
| EAN / GTIN | 4045197077127 | |
| Manufacturer number | 135600 M12 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
13
P
15
P
15
P
15
M
6
N
13
Description
Version:
HSS-E
Application:
For components which are galvanised after threading or shrink slightly when hardened.