{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Carbide core drill Depth of cut 35 mm, TiAlN, ⌀ DC: 22mm
Article no.: 2160058
Catalog no.: 118782
Article code:
Product details
Technical Data
| Wet minimum | suitable only under restricted conditions | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Dry machining | suitable | |
| Shank diameter DS | 19.05 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Cooling lubricant | yes | |
| Cutter diameter, min. Dc min. | 22 mm | |
| Configurable | no | |
| Application for type of drilling | through hole | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Usable length L1 | 35 mm | |
| Overall length L | 74.5 mm | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Machining method | drilling into solid material (BVB) | |
| Type of product | core drill | |
| Recommended maximum drilling depth | 35 mm | |
| Content | single part | |
| Max. cutting depth L2 | 35 mm |
Identification & Classification
| Article number | 2160058 | |
| Catalog number | 118782 | |
| EAN / GTIN | 4069515028875 | |
| Manufacturer number | 118782 22 | |
| Article class | 11F | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
N
P
P
P
P
M
M
K
K
Description
Version:
Suitable for all popular magnetic core drilling machines. Very good cutting properties due to optimised cutting edge geometry. Easy to regrind. With Weldon shank - ⌀ 19 mm.
Carbide with special TiAlN coating − long tool life and outstanding cutting performance.
Carbide with special TiAlN coating − long tool life and outstanding cutting performance.
Application:
On mobile magnetic drilling machines or stationary pillar drilling machines to produce large holes in steel construction. The core drill cuts only a thin material ring. The drilled core is ejected by a spring loaded ejector pin.
Supplied with:
Without ejector pin.
Note:
For the lubrication of core drills, we recommend high performance cutting oil (see No. 084210).