{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
GARANT Diabolo solid carbide milling cutter HRC 62 HPC, TiSiN, ⌀ DC: 2mm
Article no.: 2160610
Catalog no.: 203221
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: H
- Tolerance nominal ⌀: h7
- No. of teeth Z: 4
Product details
Technical Data
| Series | Diabolo | |
| Cutting edge ⌀ DC | 2 mm | |
| Coating | TiSiN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | H | |
| Tolerance nominal ⌀ | h7 | |
| No. of teeth Z | 4 | |
| Helix angle | 50 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 8 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 60 HRC | 0.015 mm | |
| Colour ring | red | |
| Type of product | Indexable end mill |
Identification & Classification
| Article number | 2160610 | |
| Catalog number | 203221 | |
| EAN / GTIN | 4069515036566 | |
| Manufacturer number | 203221 2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
170
H
150
H
130
H
100
H
80
H
65
Description
Version:
GARANT Diabolo:
Special geometry, coating and carbide specially for hard machining.
Specialist for steels up to 62 HRC. Reliable process and longer service life thanks to optimised cutter geometry and state-of-the-art high-performance coating.
Dimensions similar to DIN 6527.
Special geometry, coating and carbide specially for hard machining.
Specialist for steels up to 62 HRC. Reliable process and longer service life thanks to optimised cutter geometry and state-of-the-art high-performance coating.
Dimensions similar to DIN 6527.
Application:
For peripheral milling as a finishing operation.
(plunge cutting only to shallow depths).
(plunge cutting only to shallow depths).