{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling AOMT110404 TR, for Softcut®90° milling cutters, HB7830-1
Article no.: 2161378
Catalog no.: 215485
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | AOMT110404 TR | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | rectangular | |
| Insert width | 7.5 mm | |
| Blade thickness | 4.1 mm | |
| Insert length | 12.8 mm | |
| Insert version | right-hand | |
| Cutting edge length | 12.8 mm | |
| Cutting edge height | 4.1 mm | |
| Corner radius | 0.4 mm | |
| Corner chamfer angle | 90 degrees | |
| Corner angle | 90 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 20 degrees | |
| Normal clearance angle (main cutting edge) | 13 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 20 degrees | |
| Normal clearance angle (flat cutting edge) | 20 degrees | |
| Radius of main cutting edge | 2.7 mm | |
| Cutting conditions | continuous | |
| ISO-Code | AOMT110404 TR | |
| Attachment hole diameter | 3.4 mm | |
| Tool material | HC-P25 | |
| Machining group, manufacturer-specific | P | |
| Machining group | P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HB7830-1 | |
| Coating | AlTiN | |
| Grade | HB7830 | |
| Insert thickness | 4.1 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | AO110404R | |
| Interface coding for insert according to ISO TS 13399-60 | AO110404R | |
| Insert designation | AOMT110404 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 2 pcs. | |
| Weight | 3 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 2161378 | |
| Catalog number | 215485 | |
| EAN / GTIN | 4069515039369 | |
| Manufacturer number | 215485 UNI | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
330
P
290
P
250
P
200
M
150
M
120
Description
Note:
Standard application values for ae = 0.5×D / ap = 3 mm, ap max = 5.5 mm.