{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling AOET110404 FR, for Softcut®90° milling cutters, HU7810-1
Article no.: 2161401
Catalog no.: 215423
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | AOET110404 FR | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | pentagonal | |
| Wide insert B | 7.5 mm | |
| Thickness of the insert S | 4.13 mm | |
| Length of cutting insert L | 12.8 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 12.5 mm | |
| Height of cutting edge | 4.13 mm | |
| Corner radius R | 0.4 mm | |
| Corner chamfer length C | 0 mm | |
| Corner chamfer angle | 90 degrees | |
| Corner angle | 90 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 28 degrees | |
| Normal clearance angle (main cutting edge) | 13 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 20 degrees | |
| Normal clearance angle (flat cutting edge) | 20 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 11 mm | |
| ISO-Code | AOET110404 FR | |
| Attachment hole diameter | 3.4 mm | |
| Type of chip breaker | S | |
| Wiper length radial Lwr | 2.7 mm | |
| Tool material | Carbide | |
| Standard designation for cutting medium, 2nd Priority | HW-N10 | |
| Machining group, manufacturer-specific | N | |
| Machining group | N (non-ferrous metals) | |
| Tool application group | HU7810-1 | |
| Cutting media, manufacturer’s designation | HU7810-1 | |
| Coating | uncoated | |
| Insert thickness T | 4.13 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | AO110404R | |
| Interface coding for insert according to ISO TS 13399-60 | AO110404R | |
| Insert designation | AOET110404 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | Aluminium; non-ferrous materials (N) | |
| Tolerance Class | E | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 2 pcs. | |
| Weight | 3 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 2161401 | |
| Catalog number | 215423 | |
| EAN / GTIN | 4069515039123 | |
| Manufacturer number | 215423 ALU | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
850
N
750
N
600
Description
Note:
Standard application values for ae = 0.5×D / ap = 3 mm, ap max = 5.5 mm.