{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Countersink 90°, uncoated, External ⌀ Dc: 31mm
Article no.: 216155
Catalog no.: 150395
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Feed f | 0.25 mm/rev. | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | morse taper MT | |
| Interface coding | HOG-MKB2 | |
| Holder shape | with tang | |
| Holder version | dimensionless nominal size without cooling | |
| Dry machining | suitable only under restricted conditions | |
| Holder size, no dimensions | 2 | |
| Length of shank LS | 80 mm | |
| Cooling lubricant | yes | |
| Cutter diameter, min. Dc min. | 4.2 mm | |
| Cutter diameter, max. Dc max. | 31 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| For hole diameter d | 4.2 mm | |
| Flute length Lc | 20.8 mm | |
| Taper length | 13.4 mm | |
| Number of teeth Z | 3 | |
| Twist direction | right-hand | |
| Angle, 1st step | 90 degrees | |
| Pilot pin | without guiding pin | |
| Tool material | HSS | |
| Machining group | N (non-ferrous metals); P (steel) | |
| Cutting media, manufacturer’s designation | HSS | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Usable length L1 | 37 mm | |
| Overall length L | 112 mm | |
| Weight | 220 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 335 D | |
| Shape letter standard number | D | |
| Machining method | profile countersinking (SPR) | |
| Colour ring | without | |
| Type of product | countersink | |
| Feed in | steel < 500 N/mm2 | |
| Content | single part |
Identification & Classification
| Article number | 216155 | |
| Catalog number | 150395 | |
| EAN / GTIN | 4045197086938 | |
| Manufacturer number | 150395 31 | |
| Article class | 12M | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
70
N
33
P
28
P
27
P
27
Description
Version:
Countersinks radially relief ground. Chip flutes are ground from solid up to size 31. Chip angle varies with the countersink ⌀ for optimum chip formation. Countersink point and circumference are relief ground and cut easily.
Economy countersink version.
Economy countersink version.