{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT easyFix Flex Power, Type: USB
Article no.: 2162242
Catalog no.: 957520
Article code:
New product
Click to enlarge image
Click to enlarge image
Application example
Click to enlarge image
Application example
Click to enlarge image
Application example
Click to enlarge image
Application example
Click to enlarge image
Application example
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Series | easyFix | |
| Manufacturer’s designation | GARANT easyFix Flex Power | |
| Characteristics | overload protection | |
| Type of product | power supply unit | |
| Output power | 90 W |
Identification & Classification
| Article number | 2162242 | |
| Catalog number | 957520 | |
| EAN / GTIN | 4069515041355 | |
| Manufacturer number | 957520 USB | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
The following connections are provided:
- 1 pc. USB-C (60 W maximum output power) PD (Power Delivery): 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3A as well as PPS (Programmable Power Supply) 5V-21V/3A,
- 1 pc. USB-C PD Power Delivery: 15W maximum output power; 5V/3A,
- 1 pc. USB-A port (15 W maximum output power; 5V/3A).
Function:
IP20: No protection against penetration by foreign bodies with ⌀ < 12 mm, however touching should be avoided, and no protection against water.
Suitable for:
Rechargeable batteries from AEG - AMPSHARE - BERNER - BOSCH - BOSCH GREEN - DEWALT - EINHELL - FEIN - FESTOOL - HAZET - HIKOKI - HILTI - INGERSOLL - MAKITA - METABO - MILWAUKEE - PANASONIC - RIDGID - RUPES - SNAP ON - WÜRTH.
the following connectors:
AEG/RIDGID US No. 03.6158C;
BERNER No. 03.6155C;
BOSCH/AMPSHARE No. 03.6140C;
BOSCH GREEN No. 03.6141C;
DEWALT No. 03.6142C;
EINHELL No. 03.6143C;
FINE No. 03.6144C;
FESTOOL No. 03.6153C;
FLEX No. 03.6145C;
HAZET No. 03.6146C;
HIKOKI No. 03.6147C;
HILTI (21.6 V) No. 03.6157C;
INGERSOLL No. 03.6152C;
MAKITA No. 03.6148C;
MILWAUKEE No. 03.6149;
PANASONIC No. 03.6157;
RIDGID No. 03.6154;
RUPES No. 03.6159;
SNAP-ON No. 03.6151;
WÜRTH No. 03.6150
the following connectors:
AEG/RIDGID US No. 03.6158C;
BERNER No. 03.6155C;
BOSCH/AMPSHARE No. 03.6140C;
BOSCH GREEN No. 03.6141C;
DEWALT No. 03.6142C;
EINHELL No. 03.6143C;
FINE No. 03.6144C;
FESTOOL No. 03.6153C;
FLEX No. 03.6145C;
HAZET No. 03.6146C;
HIKOKI No. 03.6147C;
HILTI (21.6 V) No. 03.6157C;
INGERSOLL No. 03.6152C;
MAKITA No. 03.6148C;
MILWAUKEE No. 03.6149;
PANASONIC No. 03.6157;
RIDGID No. 03.6154;
RUPES No. 03.6159;
SNAP-ON No. 03.6151;
WÜRTH No. 03.6150
Supplied with:
Supplied with 2 pcs. GARANT easyFix base plates No. 955820 size 2 for attaching to perforated panels.
Note:
Not suitable for charging rechargeable batteries. Manufacturer rechargeable batteries must be charged using original chargers.
Warning:
Intended use
Reasonably foreseeable misuse
- Suitable for both industrial and private use.
- Protected against dust in accordance with IP 20. Observe the instructions for use of the batteries used.
- Use cables with a suitable diameter for the plug.
- For indoor use only.
- For use with CAS batteries or other batteries with the SCANGRIP CONNECT system.
- 1 pc.
- SP1310 / P2II straight plug from Weipu included.
Reasonably foreseeable misuse
- Do not expose to strong heat, direct sunlight or naked flames.
- Do not use in explosion hazard areas.
- Do not cover the device – risk of overheating.
- Do not continue to use the device if the housing is damaged.
- Do not open the casing.
- Keep device away from heat, oil and sharp objects.
- Do not store near corrosive or aggressive chemical substances or solvents.