{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Modular counterboring system holder, Size / shank size: 2MK3
Article no.: 216284
Catalog no.: 156720
Article code:
Click to enlarge image
Click to enlarge image
MK-Schaft
Offers
Product details
Technical Data
| Holder type | morse taper MT | |
| Holder shape | morse taper | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 3 | |
| Type of mounting | spigot | |
| Shank length | 81 mm | |
| Min. clamping diameter | 24 mm | |
| Max. clamping diameter | 66 mm | |
| Gauge length | 75 mm | |
| External diameter, tool-end | 34.5 mm | |
| Interface | joint 1; joint 2 | |
| Type of product | non-specific toolholder | |
| Overall length | 81 mm | |
| Overall height | 34.5 mm | |
| Overall width | 34.5 mm | |
| Through-coolant available | no | |
| Material | steel | |
| Surface treatment | hardened | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 216284 | |
| Catalog number | 156720 | |
| EAN / GTIN | 4033591011519 | |
| Manufacturer number | 15 823 300 | |
| Manufacturer/responsible person | GFS Werkzeuge & Metallverarbeitung GmbH, Gewerbegebiet Limbach 12, 96178 POMMERSFELDEN, Germany, www.gfs-tools.com |
Application Table
N
40
N
60
N
20
P
25
P
20
P
15
P
10
P
5
M
5
Description
Version:
Just 4 holder sizes cover a range from 5 mm to 66 mm (up to 85 mm available on request). Counterbores and solid pilots can be combined as required within one size, the solid pilot can be changed without removing the counterbore.
Hardened and ground. Counterbore and pilot are clamped by one screw each, the counterbore is additionally protected against turning by means of a pin.
Hardened and ground. Counterbore and pilot are clamped by one screw each, the counterbore is additionally protected against turning by means of a pin.
Application:
For DIN counterbores, as well as with appropriate pilot / counterbore combinations for stepped holes or non-standard counterbores.
For stepped through holes pilots are available ex works in 2 lengths so that these holes can be produced without a separate pilot hole drilling operation.
For stepped through holes pilots are available ex works in 2 lengths so that these holes can be produced without a separate pilot hole drilling operation.
Note:
Counterbores with TiN coating available on request. The carbide version is specially recommended for machining grey cast iron, brass and chrome-nickel steels.