{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Taper reamer 1:10, small × large ⌀: 3X10mm
Article no.: 216588
Catalog no.: 161000
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Interface position | on the machine | |
| Holder type | square mounting | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Kegel-Reibahle 1:10 | |
| Cutter diameter 1st step min. DC | 3 mm | |
| Configurable | no | |
| Taper diameter min. D3 | 3 mm | |
| Taper diameter max. D2 | 10 mm | |
| Cutting edge length LC | 70 mm | |
| Twist direction | neutral, straight | |
| Taper ratio | 1:10 | |
| Shank square □ | 6.3 mm | |
| Type of reaming tool | for through holes | |
| Type of drive | hand reamer | |
| Tool material | HSS | |
| Machining group | N (non-ferrous metals); P (steel) | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Overall length L | 100 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Machining method | Reiben (BRE) | |
| Colour ring | without | |
| Type of product | taper reamer | |
| Content | single part |
Identification & Classification
| Article number | 216588 | |
| Catalog number | 161000 | |
| EAN / GTIN | 4045197088802 | |
| Manufacturer number | 161000 3X10 | |
| Article class | 12O | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
P
P
P
Description
Version:
Straight fluted hand reamer with conically increasing cutting edges (1 mm over 10 mm length).
Application:
For reaming conical holes or uninterrupted holes prepared in steps. Not for parallel holes.