{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Metal circular saw blade coarse HZ, uncoated, ⌀×thickness: 125X2,5mm
Article no.: 217069
Catalog no.: 176000
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Max. cutting depth, Full slot milling | 42.75 mm | |
| Interface position | on the machine | |
| Holder type | milling arbor mounting | |
| Type of mounting | hole (internal mounting) | |
| Cooling lubricant | yes | |
| Cutter diameter Dc | 125 mm | |
| Diameter of mounting hole D3 | 22 mm | |
| Cutting width B | 2.5 mm | |
| Tooth form | Hz | |
| Number of cutters (peripheral side) Z | 50 | |
| Tool material | HSS | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 1838 | |
| Shape letter standard number | C | |
| Machining method | parting-off milling (FTR) | |
| Type of product | circular saw blade | |
| Maximum cutting depth | 42.75 mm | |
| Correction factor fz | 1.5 | |
| Cutting depth in use | Full slot milling |
Identification & Classification
| Article number | 217069 | |
| Catalog number | 176000 | |
| EAN / GTIN | 4045197244659 | |
| Article class | 17A | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
N
800
N
600
P
37
P
22
P
20
P
15
M
11
M
11
K
27
N
400
Description
Version:
All blades are hollow ground to give side clearance. All sizes with 200 mm ⌀ and very thin blades have a bore collar for stabilisation. Accuracy, tooth form, and side clearance grinding according to DIN 1840.
DIN 1838 C coarse-toothed with curved form C. High performance tooth pitch (HZ) with high teeth and lower finishing teeth. The roughing tooth is 0.15 – 0.30 mm higher than the finishing tooth and is chamfered at both tooth corners. In this way both types of teeth share the cutting work.
DIN 1838 C coarse-toothed with curved form C. High performance tooth pitch (HZ) with high teeth and lower finishing teeth. The roughing tooth is 0.15 – 0.30 mm higher than the finishing tooth and is chamfered at both tooth corners. In this way both types of teeth share the cutting work.
Application:
Particularly suitable for cutting workpieces with low to medium tensile strength. High cutting performance due to the chip breaking tooth form.
Please note: If the component is not cut through, but only cut into, the bottom of the cut will have an additional slot due to the projecting high tooth.
Please note: If the component is not cut through, but only cut into, the bottom of the cut will have an additional slot due to the projecting high tooth.
Note:
The concentricity and axial run-out values are considerably better than the figures according to DIN 1840, in some cases by up to 50 %.