{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Circular saw blade fine, ⌀×thickness: 225X2/Kmm
Article no.: 217133
Catalog no.: 177000
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | unsuitable | |
| Cutter diameter | 225 mm | |
| Diameter of mounting hole | 32 mm | |
| Cutting width | 2 mm | |
| ISO milling cutter type | K | |
| Tooth form | Bs | |
| Number of cutters (peripheral side) | 180 | |
| Tooth pitch | 4 mm | |
| Corner version | sharp-edged | |
| Tool material | HSS | |
| Machining group | P (steel) | |
| Coating | tempered | |
| Overall length | 2 mm | |
| Functional length | 2 mm | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 1840 | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade |
Identification & Classification
| Article number | 217133 | |
| Catalog number | 177000 | |
| EAN / GTIN | 4045197244895 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
N
800
N
600
P
37
P
22
P
20
P
15
M
11
M
11
S
15
K
27
N
400
Description
Version:
German top quality product. Precision tooth geometry and very fine ground side faces. Significant increase in service life and protection against edge build-up due to the nitrided surface.
Application:
For low speed machines (approx. 50 rpm).
Pitch t: (tooth form).
Pitch t: (tooth form).
- 4 mm (BW) − For profiles and pipes with 1.0 − 1.5 mm wall thickness.
- 5 / 6 mm (HZ) −For medium profiles, pipes and solid bar with 1.5 − 20 mm wall thickness / cross-section.
- 7 / 8 mm (HZ) − For thick profiles and solid bar up to approx. 50 mm wall thickness / cross-section.
- 10 − 16 mm (HZ) − For extra thick cross-sections and solid bar more than 50 mm.
Note:
- For stainless steels (such as V2A) the correct cutting speed and lubrication is crucial (see information in the machining handbook No. 110020).
- The concentricity and axial run-out values are considerably better than those to DIN 1840, in some cases by up to 50 %.