{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Circular saw blade medium, ⌀×thickness: 250X2,5mm
Article no.: 217163
Catalog no.: 177200
Article code:
Product details
Technical Data
| Innenkühlung | nein | |
| Kühlschmierstoff | ja | |
| nass min. | geeignet | |
| nass max. | geeignet | |
| trocken Bearbeitung | bedingt geeignet | |
| Öl | geeignet | |
| Luft | ungeeignet | |
| Schneidendurchmesser Dc | 250 mm | |
| Durchmesser Aufnahmebohrung D3 | 40 mm | |
| Schnittbreite B | 2,5 mm | |
| ISO-Fräsertyp | Doppelseitiger Scheibenfräser | |
| Zahnform | Hz | |
| Anzahl Schneiden (umfangseitig) Z | 128 | |
| Zahn Teilung t | 6 mm | |
| Eckausführung | scharfkantig | |
| Schneidstoff | HSS | |
| Zerspanungsgruppe | M (nichtrostender Stahl); P (Stahl) | |
| Beschichtung | angelassen | |
| Länge gesamt L | 2,5 mm | |
| Funktionslänge | 2,5 mm | |
| Schneidrichtung | rechtsschneidend | |
| Werkzeugausführung | Voll-Stahl | |
| Norm | DIN 1840 | |
| Bearbeitungsverfahren | Trennfräsen | |
| Produktart | Kreissägeblatt |
Identification & Classification
| Article number | 217163 | |
| Catalog number | 177200 | |
| EAN / GTIN | 4045197245069 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
N
800
N
600
P
37
P
22
P
20
P
15
M
11
M
11
S
15
K
27
N
400
Description
Version:
German top quality product. Precision tooth geometry and very fine ground side faces. Significant increase in service life and protection against edge build-up due to the nitrided surface.
Application:
For low speed machines (approx. 50 rpm).
Pitch t: (tooth form).
Pitch t: (tooth form).
- 4 mm (BW) − For profiles and pipes with 1.0 − 1.5 mm wall thickness.
- 5 / 6 mm (HZ) −For medium profiles, pipes and solid bar with 1.5 − 20 mm wall thickness / cross-section.
- 7 / 8 mm (HZ) − For thick profiles and solid bar up to approx. 50 mm wall thickness / cross-section.
- 10 − 16 mm (HZ) − For extra thick cross-sections and solid bar more than 50 mm.
Note:
- For stainless steels (such as V2A) the correct cutting speed and lubrication is crucial (see information in the machining handbook No. 110020).
- The concentricity and axial run-out values are considerably better than those to DIN 1840, in some cases by up to 50 %.