{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Stainless steel circular saw blade coarse, ⌀×thickness: 300X2,5mm
Article no.: 217231
Catalog no.: 177540
Article code:
Click to enlarge image
T 6/8 mm = HZ tooth format with roughing tooth and finishing tooth.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 300 mm | |
| Diameter of mounting hole | 40 mm | |
| Cutting width | 2.5 mm | |
| Tooth form | Hz | |
| Number of cutters (peripheral side) | 120 | |
| Tooth pitch | 8 mm | |
| Corner version | sharp-edged | |
| Tool material | HSS-E | |
| Machining group | M (stainless steel) | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 1840 | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade | |
| Max. cutting depth | 2.5 mm |
Identification & Classification
| Article number | 217231 | |
| Catalog number | 177540 | |
| EAN / GTIN | 4045197245434 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
P
37
P
22
P
20
P
15
P
11
M
11
M
11
S
15
K
27
N
400
Description
Version:
Precision toothing and very fine ground side faces. Rake angle especially for stainless steels. Nitrided surface: hard, durable protection against edge build-up.
Application:
Pitch t: (tooth form)
- 3 mm (BW) − For thin pipes, profiles, sheet metal with 1 − 2 mm wall thickness.
- 4 mm (BW) − For pipes, profiles, sheet metal with 1.5 − 4 mm wall thickness.
- 6 mm (HZ) − For pipes, profiles and solid material above 4 mm wall thickness or cross−section up to a maximum of. 50 mm.
- 8 mm (HZ) − For solid material above 50 mm.
Suitable for:
EISELE and TRENNJAEGER cold circular saws.
Note:
- For optimum performance and service life: Use cooling lubricant concentrate No. 084260.
- The concentricity and axial run-out values are considerably better than the figures according to DIN 1840, in some cases by up to 50 %.