{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Carbide-tipped circular saw blade Rake angle positive, ⌀×bore: 300X30Fmm
Article no.: 217339
Catalog no.: 179600
Article code:
Product details
Technical Data
| Hole circle diameter, 1 | 42 | |
| Hole circle diameter, 2 | 63 | |
| Number of holes, 1 | 2 | |
| Number of holes, 2 | 2 | |
| Diameter of driver hole, 1 | 7 | |
| Diameter of driver hole, 2 | 11 | |
| Cutter diameter Dc | 300 mm | |
| Diameter of mounting hole D3 | 30 mm | |
| Cutting width B | 3.2 mm | |
| Number of cutters (peripheral side) Z | 96 | |
| Tooth pitch t | 9.8 mm | |
| Number of diameters of hole circle | 2 | |
| Index of hole circle | 1; 2 | |
| Tool material | Carbide | |
| Type of product | circular saw blade | |
| suitable for saw makes | Kaltenbach | |
| Max. cutting depth L2 | 3.2 mm |
Identification & Classification
| Article number | 217339 | |
| Catalog number | 179600 | |
| EAN / GTIN | 4045197095992 | |
| Manufacturer number | 179600 300X30F | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
850
N
650
N
450
Description
Version:
High performance toothing with high teeth and lower finishing teeth. The trapezoidal carbide tips cut easily and generate clean cut surfaces.
Advantage:
Particularly suitable for hard anodised profile material.
Application:
On high-speed machines.
F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
G = coarse tooth pitch for solid material such as bars and rods.
Positive rake angle 5° for smooth, burr-free cutting on machines with saw blade infeed from below or horizontal. Very suitable for cutting to size, for mitre and ripping cuts on profiles, and for cutting into solid material.
F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
G = coarse tooth pitch for solid material such as bars and rods.
Positive rake angle 5° for smooth, burr-free cutting on machines with saw blade infeed from below or horizontal. Very suitable for cutting to size, for mitre and ripping cuts on profiles, and for cutting into solid material.
Note:
- Recommended cutting speed: 40 − 80 m/s, for harder materials such as alloys, brass, or bronze it is preferable to use the lowest recommended speed.
- Pay special attention to maintaining an even feed rate; this prevents damage.
- Additional versions on request.
- Further circular saw blades can be found in catalogue volume 2.