{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack RDHW 1003 MOTN, HB7505
Article no.: 2174757
Catalog no.: GG2145
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | round | |
| Width of insert B | 12.7 mm | |
| Thickness of insert S | 3.97 mm | |
| Length of insert L | 12.7 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 12.7 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner radius R | 6.35 mm | |
| ISO-Code | RDHW 1003 MOTN; RDMW 12T3 MOTN | |
| Tool material | Carbide | |
| Coating | CVD | |
| Grade | HB7505 | |
| Insert thickness T | 3.97 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | RDHW 1003 MOTN | |
| Interface coding for insert according to ISO TS 13399-60 | RDMW 12T3 MOTN | |
| Insert designation | RDHW 1003 MOTN | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 1 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Content | 50 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 2174757 | |
| Catalog number | GG2145 | |
| EAN / GTIN | 4069515046664 | |
| Manufacturer number | GG2145 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
275
P
275
P
250
P
160
P
125
H
155
H
140
H
110
K
240
