{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Steel solid carbide milling cutter HPC, TiAlN, ⌀ f8 DC: 4mm
Article no.: 2174827
Catalog no.: GG1053
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Number of pieces | 5 pcs. | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 6 mm | |
| Shank type | HB | |
| Cooling lubricant | yes | |
| Series | Master Steel | |
| Manufacturer’s designation | GARANT Steel VHM-Schaftfräser HPC | |
| Tool material | solid carbide | |
| Cutter diameter Dc | 4 mm | |
| Cutting edge length Lc | 8 mm | |
| ISO milling cutter type | end / face mill | |
| Number of effective cutters (peripheral side) Z | 4 | |
| Twist angle | 38 degrees | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.08 mm | |
| Corner chamfer angle | 45 degrees | |
| Shape identifier, manufacturer-specific | N | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 4 | |
| Helix angle characteristic | unequal spacing | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Usable length L1 | 8 mm | |
| Overall length L | 54 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6527 | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Content | set | |
| Correction factor fz | 2 | |
| Cutting depth min. | 0.1 mm | |
| Max. cutting depth L2 | 4 mm; 8 mm |
Identification & Classification
| Article number | 2174827 | |
| Catalog number | GG1053 | |
| EAN / GTIN | 4069515046145 | |
| Manufacturer number | GG1053 4 | |
| Article class | GGN | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
250
P
200
P
180
P
160
M
70
M
50
K
120
Description
Version:
For roughing and finishing.
For use in unstable machining processes and for machining complex components.
Up to 1×D into solid material at very high feed rates with smooth cutting action.
At maximum machining depths, ensure compliance with the ratio dimension LC (cutting length) / ⌀ DC (cutting ⌀)!
For use in unstable machining processes and for machining complex components.
Up to 1×D into solid material at very high feed rates with smooth cutting action.
At maximum machining depths, ensure compliance with the ratio dimension LC (cutting length) / ⌀ DC (cutting ⌀)!
Advantage:
Optimised flute form, eccentric relief ground, wide chip space.
Note:
Same as No. 203053. Successor product to GG1034.