{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack WNMG indexable insert finishing 30 pieces HB7020-2
Article no.: 2176817
Catalog no.: GG2479
Article code:
New product
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Wide insert B | 9.525 mm | |
| Insert version | neutral | |
| Corner radius R | 0.8 mm | |
| Corner angle | 80 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| ISO-Code | WNMG 080408 | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Tool application group | P20 | |
| Coating | uncoated | |
| Grade | HB7020 | |
| Insert thickness T | 3.18 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | WNMG080408 | |
| Interface coding for insert according to ISO TS 13399-60 | WNMG080408 | |
| Insert designation | WNMG 080408 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Machining method | grooving and parting off (EEA) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutting conditions | interrupted | |
| Content | 30 pcs. |
Identification & Classification
| Article number | 2176817 | |
| Catalog number | GG2479 | |
| EAN / GTIN | 7612428307208 | |
| Manufacturer number | GG2479 080408 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
P
P
P
P
