{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack CNMG indexable insert roughing 30 pieces HB7010-2
Article no.: 2176900
Catalog no.: GG2413
Article code:
New product
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Insert width | 12.9 mm | |
| Insert length | 12.9 mm | |
| Insert version | neutral | |
| Insert diameter | 7.938 mm | |
| Corner radius | 1.2 mm | |
| Corner angle | 80 degrees | |
| Rake angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| ISO-Code | CNMG 120412 | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Tool application group | P10 | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | CNMG 120412 | |
| Interface coding for insert according to ISO TS 13399-60 | CNMG 120412 | |
| Insert designation | CNMG 120412 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutting conditions | continuous | |
| Content | 30 pcs. |
Identification & Classification
| Article number | 2176900 | |
| Catalog number | GG2413 | |
| EAN / GTIN | 7612428308021 | |
| Manufacturer number | GG2413 120412 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
P
P
P
P
