{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Thread turning tool right-hand, similar to DIN 282 (ISO 12), P20/K25, Shank square: 12mm
Article no.: 218194
Catalog no.: 297155
Article code:
Product details
Technical Data
| Länge gesamt | 110 mm | |
| Schaftform | vierkant | |
| Schneidrichtung | rechtsschneidend | |
| Halterform | gerade | |
| Bearbeitungsverfahren | Gewindedrehen, außen | |
| Norm | DIN 282 | |
| Schaftbreite | 12 mm | |
| Schafthöhe | 12 mm | |
| Schneidstoff | HC-P20 | |
| Normbezeichnung Schneidstoff, 2. Priorität | HC-K25 | |
| Zerspanungsgruppe | K (Gusseisen); P (Stahl) | |
| Beschichtung | unbeschichtet | |
| Produktart delete( ) | Drehmeißel |
Identification & Classification
| Article number | 218194 | |
| Catalog number | 297155 | |
| EAN / GTIN | 4045197521408 | |
| Manufacturer number | 297155 12 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Carbide − steel shanks with 700 - 800 N/mm2 strength and flat chamfered mounting surface. Fitted with diamond ground carbide inserts. Angles on the inserts are precision ground. All turning tools are supplied with sharp cutting edges. Sharpening the cutting edge with a boron carbide hand lapper will increase the tool edge life. The extent of the wear area is dependent on the cutting conditions. For roughing and interrupted machining it is imperative that the cutting edges are sharpened.
Fitted with diamond ground carbide inserts.
Fitted with diamond ground carbide inserts.
Application:
P20/K25 for machining steel and cast iron.
M20 for machining stainless steels.
M20 for machining stainless steels.
Attention:
For rough and interrupted machining the cutting edges should be sharpened with a boron carbide hand lapper (No. 558812).