{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Internal thread turning tool right-hand, similar to DIN 283 (ISO 13), P20/K25, Shank square: 25mm
Article no.: 218205
Catalog no.: 297175
Article code:
Product details
Technical Data
| Overall length | 250 mm | |
| Shank form | square | |
| Hole diameter min. | 55 mm | |
| Cutting direction | right-hand cutting | |
| Machining method | thread turning, internal | |
| Standard | DIN 283 | |
| Shank width | 25 mm | |
| Shank height | 25 mm | |
| Machining group | K (cast iron); P (steel) | |
| Type of product delete( ) | turning tool |
Identification & Classification
| Article number | 218205 | |
| Catalog number | 297175 | |
| EAN / GTIN | 4045197521477 | |
| Manufacturer number | 297175 25 | |
| Article class | 22E | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Carbide − steel shanks with 700 - 800 N/mm2 strength and flat chamfered mounting surface. Fitted with diamond ground carbide inserts. Angles on the inserts are precision ground. All turning tools are supplied with sharp cutting edges. Sharpening the cutting edge with a boron carbide hand lapper will increase the tool edge life. The extent of the wear area is dependent on the cutting conditions. For roughing and interrupted machining it is imperative that the cutting edges are sharpened.
Fitted with diamond ground carbide inserts.
Fitted with diamond ground carbide inserts.
Application:
P20/K25 for machining steel and cast iron.
M20 for machining stainless steels.
M20 for machining stainless steels.
Attention:
For rough and interrupted machining the cutting edges should be sharpened with a boron carbide hand lapper (No. 558812).