{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Revolving lathe centre high precision version Point angle 60°, Morse taper: 2
Article no.: 219443
Catalog no.: 320700
Article code:
Product details
Technical Data
| Overall length | 120 mm | |
| Head diameter | 28 mm | |
| Type of centring point | tracking | |
| Point angle | 60 degrees | |
| Largest point diameter | 24 mm | |
| Mounting machine-side | MK2 | |
| Usable length | 23 mm | |
| Max. workpiece weight | 200 kg | |
| Maximum radial run-out | 0.003 mm | |
| Use | grinding; turning | |
| Weight | 0.3 kg | |
| Type of product | centring drill |
Identification & Classification
| Article number | 219443 | |
| Catalog number | 320700 | |
| EAN / GTIN | 4045197313232 | |
| Manufacturer number | 2WP |
Description
Version:
- Extremely slim body and high concentricity.
- Precision needle and thrust bearings result in a maximum variation of 0.003 mm and a very small body ⌀.
- Taper and chamfered parts are made of hardened bearing steel (61 − 63 Rockwell).
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For turning and grinding where a small head ⌀ and high accuracy are required.