Express anchor stainless steel short version 10/5/70 IMC K

The Upat Express Anchor IMC R is the cost-effective specialist in the area of bolt anchors. This steel anchor, made of rustproof steel, is particularly suitable for fastening medium-heavy loads in outdoor areas in uncracked concrete and natural stone with a dense structure. The 2 cm shorter version saves on drilling costs and material costs. The Express Anchor IMC R can be set in pre- and push-through installation and hammered into the blown-out drill hole. When the nut is tightened, the bolt is pushed into the expansion clip, which expands against the borehole wall, thus ensuring a high level of holding security. The bolt anchor is used particularly frequently for fastening thin concrete components and in applications where the loads play a subordinate role.

• Secure anchoring: ETA concrete approval option 7. Versatile use for secure anchoring in uncracked concrete
• Fastening close to edges: The cone and expansion clip unit enables minimal edge and centre distances
• Easy to install: Shaft with optimised diameter for low impact energy.
• Protected thread: Distinctive impact pin protects the thread from damage during the setting process
• Reliable follow-up check: The head embossing allows for follow-up checks once installed
• Secure impact: The clip remains in position during impact, even if it hits reinforcement or unfavourable drill holes

Material variants

• Stainless steel (R/A4): For fastenings outdoors or in damp rooms
• Galvanised steel (gvz): For fastenings in dry indoor areas

• Short (K): The short version of the bolt anchor reduces the drill hole depth and the risk of hitting reinforcement, enabling quick installation while saving costs
• Large washer (GS): The large washer protects the surface of the attachment and prevents cutting into wood

Approved for:

• Concrete C20/25 to C50/60, uncracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure

Function: When the nut is tightened, the bolt pushes into the expansion clip, which spreads against the borehole wall.

Installation: The Upat Express anchor IMC is installed using through-hole mounting. Drill the hole, clean the hole. Drive in the bolt anchor. Tighten to the specified torque – done. The bolt diameter is equal to the hole diameter

Tools: Drill, drill press, blow-out pump (UPM AB), hammer, torque wrench