{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Scaffold sleeve 14/100 UGH
Article no.: 2197561
Catalog no.: 4779
Article code:
Product details
Technical Data
| With screw | No | |
| Through installation | Yes | |
| Suitable for calcium silicate brick | Yes | |
| Suitable for perforated brick | No | |
| Suitable for wood | No | |
| suitable for | UGS12X120 | |
| Stand-off installation | No | |
| Material | Nylon | |
| Suitable for solid brick | Yes | |
| Drive | without | |
| Suitable for aerated concrete | No | |
| Suitable for natural stone | Yes | |
| Suitable for hexagon wood screw | Yes | |
| Suitable for plasterboard | No | |
| Suitable for fastening with cable ties | No | |
| Colour | grey | |
| Suitable for aerated concrete | No | |
| Suitable for concrete | Yes | |
| Typ | UGH | |
| d0 | 14 mm | |
| min. anchorage depth | 70 mm | |
| h2 | 110 mm | |
| Material grade | Nylon | |
| Version | without screws | |
| With edge | Yes | |
| Pre-installation | No | |
| Suitable for chipboard | No | |
| Anchor length | 100 mm | |
| Surface protection | Other | |
| max. thickness of non-load-bearing layer | 30 mm |
Identification & Classification
| Article number | 2197561 | |
| Catalog number | 4779 | |
| EAN / GTIN | 4000657022246 | |
| Manufacturer number | 542569 |
Description
Description:
The Upat UGH scaffolding sleeve is an expansion anchor with a long shaft for high loads. The anchor is made of high-quality nylon and is suitable for fastening in concrete and solid masonry. In combination with the UGS eye bolt, high holding values can be achieved. When screwing in the scaffolding anchor, the expansion wings prevent the plug from turning and facilitate installation. The interaction between the plug and the anchor enables high holding values and greater safety in scaffolding construction. Thanks to a slim expansion geometry, fastenings close to edges can be achieved.
Advantage:
- Edge mounting: The double expansion allows targeted force transmission parallel to the edge of the building material.
- Secure hold: The scaffolding sleeve with long shaft bridges plaster and insulation layers and ensures a secure hold in the load-bearing substrate – DIN 4420-1.
- Coordinated system: Optimally coordinated system with high holding values when combined with the UGS eyebolts. Ideal for scaffolding anchors
- Safe application: The expansion wings of the scaffolding sleeve prevent rotation in the drill hole
Application Area:
- Concrete
- Lime sand solid brick
- Natural stone with dense structure
- Solid brick
Application Notes:
Function: When the corresponding Upat scaffolding screw UGS is screwed in, the plug is spread and held in place by the contact pressure on the drill hole wall
Installation: The Upat scaffolding sleeve UGH is installed using the push-in or push-through method. Drill the hole, insert the scaffolding sleeve. Screw in the eye bolt – done!
Tools: Drill, drill press, hammer
Installation: The Upat scaffolding sleeve UGH is installed using the push-in or push-through method. Drill the hole, insert the scaffolding sleeve. Screw in the eye bolt – done!
Tools: Drill, drill press, hammer