Injection mortar UPM 44 360ml in craftsman's box

The two-component vinyl ester hybrid injection mortar UPM 44 is a highly professional fastening system for the highest loads in all relevant building materials and with the most comprehensive approval package for fastenings in perforated brick, solid brick, concrete and aerated concrete. This mortar also stands out thanks to the wide range of approved system components, such as anchor rods UPM A/ASTA, internal thread anchors and injection anchor sleeves, and thanks to the approval for reinforcement connections. The 360ml cartridge size is ideal for frequent use and can only be squeezed out with a professional dispensing gun.

Product

• Comprehensive approval package: ETA concrete approval option 1, masonry, retroactive reinforcement connection, seismic and fire protection testing
• High loads: Universal hybrid mortar with high load-bearing capacity thanks to optimised mortar formula
• Carefree working: Suitable for use in water-filled drill holes
• Efficient in perforated bricks: The sieve sleeve for use in perforated brick masonry bridges the plaster and minimises mortar consumption
• Fastening close to edges: The expansion pressure-free fastening allows for small edge and centre distances and prevents installation damage in the edge area
• Flexible working: By changing the static mixer, opened cartridges can be reused

Variants

• Cartridge Pro (360/390 ml): For long shelf life and series installation
• Cartridge Standard (300 ml): For use with standard caulking guns
• Cartridge Compact (150 ml): For individual fastenings
• Profi case (Profi Box): For practical transport and professional organisation, with removable inserts and compartments
• Craftsman's box (HWK): For safe storage, robust and stackable

20 x cartridges 360 ml, 40 x static mixers, 1 x craftsman's case

Approved for anchoring in:

• Concrete C20/25 to C50/60, cracked and uncracked
• Hollow blocks made of lightweight concrete
• Hollow blocks made of concrete
• Vertically perforated bricks
• Lime sand perforated bricks
• Lime sand solid bricks
• Aerated concrete
• Solid bricks

Function: The resin and hardener are stored separately in the dual-chamber cartridge and are only mixed into a mortar when squeezed out by the static mixer. The static mixer ensures that the two components are mixed thoroughly without any bubbles and protects the injection mortar from hardening inside the cartridge. The extruded injection mortar completely surrounds the anchor, bonds to the borehole wall and seals the borehole. In hollow brick masonry and when using a sieve sleeve, the grid structure of the sieve sleeve ensures that the mortar is evenly distributed in the borehole and prevents mortar loss in the cavity. In addition, non-load-bearing layers can be bridged. For multiple use of an injection mortar, the static mixer is not removed after the first use. The mortar hardens inside the static mixer, which is only replaced when it is next used.

Installation: Upat injection mortar UPM 44 is used with Upat anchor rods in pre-insertion or push-through installation and with Upat internal thread anchors in pre-insertion installation. Drill hole, clean drill hole. Use sieve sleeve in hollow brick. Fill drill hole. Glue anchor in place. Screw on the attachment – done. The anchor is pressed into the filled drill hole by hand with slight twisting movements. The temperature in the building material must not fall below the specified minimum value while the mortar is setting. Minimum cartridge temperature +5°C. When setting the anchor in hollow brick masonry, we recommend using the Upat UPM-SH sieve sleeve.

Tools: Drill, drill press, blow-out device (UPM AB), brush (UP BS), pressing device (UPM DM P/AM), torque wrench