{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High-pressure vice without swivel base, Jaw width: 100mm
Article no.: 220567
Catalog no.: 362250
Article code:
Product details
Technical Data
| Min. overall length | 419 mm | |
| Max. overall length | 581 mm | |
| Base body height | 87 mm | |
| Jaw width | 100 mm | |
| Jaw height | 32 mm | |
| Interchangeable jaws | yes | |
| Carriage height | 53.5 mm | |
| Clamping force selection | maximum clamping force | |
| Clamping force | 30 kN | |
| With power intensifier | yes | |
| Tenon slots | longitudinal slot; cross-slot | |
| With bore | no | |
| Can be swivelled | no | |
| Version | mechanical | |
| With swivel base | no | |
| Weight | 18 kg | |
| Material | Spheroidal graphite iron | |
| Surface | ground; hardened | |
| Accuracy | 0.03 mm | |
| Type of product | machine vice |
Identification & Classification
| Article number | 220567 | |
| Catalog number | 362250 | |
| EAN / GTIN | 4250364400183 | |
| Manufacturer number | 6921011000055 | |
| Manufacturer/responsible person | ALLMATIC-Jakob Spannsysteme GmbH, Jägermühle 10, 87647 Unterthingau, Germany, www.allmatic.de |
Description
Version:
- Base body with longitudinal and transverse tenon slots enables fast and exact alignment of the vice in longitudinal and transverse directions.
- High quality spheroidal cast iron, hardened, ground workpiece mounting face and ground guides.
- Maintenance-free high pressure spindle with constant pressure level due to low-wear fully mechanical power intensifier.
- Required clamping force pre-selectable: No high pressure at 0 setting. Continuous tests have shown that the power intensifier can withstand 1 million working strokes without harm.
- No fall-off in clamping force. Fast alignment with 2 loose tenons in the precisely manufactured slot in the vice base.
- Interchangeable jaws, hardened and ground(with serrated faces).
- Height tolerance − 0.03 mm.
Application:
- For vibration-free, absolutely reliable clamping at maximum cutting and feed rate forces.
- Consistent support height allows efficient working with several vices alongside each other.
- Clamping using crank. High clamping forces can be achieved with low physical effort due to maximum 2 spindle rotations.
Supplied with:
4 table clamps, 1 pair serrated jaws, crank handle.