{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Micrometer with dial comparator, Measuring range: 0-25mm
Article no.: 221069
Catalog no.: 422500
Article code:
Product details
Technical Data
| Series | Micromar 40 F | |
| IP index of protection | not specified | |
| Packaging | wallet | |
| Power supply | no energy supply | |
| Barrel diameter | 32 mm | |
| Measuring spindle diameter | 7.5 mm | |
| Rotating measuring spindle | yes | |
| Parallelism of the measuring faces | 1 µm | |
| Flatness of measuring faces | 0.2 µm | |
| Clearance depth of micrometer frame | 16 mm | |
| Hand temperature protection | yes | |
| With setting dimension | yes | |
| Reading | 0.01 mm | |
| With dial indicator / dial comparator | yes | |
| Dial indicator / dial comparator reading | 0.001 mm | |
| Measuring range of dial indicator / dial comparator ± | 0.065 mm | |
| Graduation of the precision dial comparator | 0.001 mm | |
| Index of protection / protection class | IP degree of protection | |
| Type of product | outside micrometer | |
| Spindle pitch | 0.5 mm | |
| Ratchet | yes | |
| Locking / clamping lever | yes | |
| Unit for reading | millimetre | |
| Measurement technology | analogue | |
| Measuring face version | disc anvil | |
| Graduation of barrel | 1/50 mm | |
| Measuring face surface | carbide tipped | |
| Accuracy ± | 2 µm | |
| Error limit | 2 µm | |
| Measurement deviation E MPE | ±2 µm | |
| Max. measuring force | 9 N | |
| Number of micrometers | 1 pcs. | |
| Overall length | 149 mm | |
| Overall width | 100 mm | |
| Overall height | 71 mm | |
| Min. measuring range | 0 mm | |
| Measuring range max | 25 mm | |
| Standard | works standard | |
| Test certificate | no | |
| Can be calibrated | yes | |
| Content | single part |
Identification & Classification
| Article number | 221069 | |
| Catalog number | 422500 | |
| EAN / GTIN | 4059192004248 | |
| Manufacturer number | 4150000 | |
| Manufacturer/responsible person | MAHR GmbH, Carl-Mahr-Straße 1, 37073 Göttingen, Germany, www.mahr.de |
Description
Version:
Measuring spindle through-hardened and ground. With fine-lapped carbide measuring faces.Spindle and anvil made of stainless steel. One piece frame and spindle guide. Button for retracting the measurement anvil for repetitive measurements. With adjustment screw for zeroing. Tolerance pointers for good/ reject measurements. With hand temperature protection. Lever for spindle clamping.
Version - image:
Deviation read-off in 1/1000 mm.
Push button for anvil retraction.
Push button for anvil retraction.
Accuracy:
Precision dial comparator 1 µm − micrometer measurement deviation E MPE ±2 µm.