{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of gloves MASTER FIT OIL+, Glove size: 6
Article no.: 2229382
Catalog no.: 094326
Article code:
New product
Product details
Technical Data
| Series | MASTER FIT OIL+ | |
| Contents pairs | 1 pair | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | 1 | |
| Tear propagation resistance | 2 | |
| Resistance to penetration | 1 | |
| Resistance to cuts (TDM) | X | |
| Impact protection | not defined | |
| A: Behaviour when exposed to fire, EN 407 | X | |
| B: Contact heat, EN 407 | 1 | |
| C: Convection heat, EN 407 | X | |
| D: Radiated heat, EN 407 | X | |
| E: small molten spatters, EN 407 | X | |
| F: large molten spatters, EN 407 | X | |
| Material of coating, full coating | Nitrile | |
| EN 407 code | X1XXXX | |
| EN 388 code | 4121X | |
| Colour | black | |
| Type of product | gloves | |
| Area of application | heat protection; cut protection | |
| Glove size | 6 | |
| Scope of application | precision | |
| Reuse | reusable | |
| Unit | pair | |
| Knitted technology (fineness) | 18G | |
| Standard | EN 388; EN 407 | |
| Backing material | nylon | |
| Coating | full coating | |
| Characteristics | DMF free; oil grip; reinforced crook of the thumb; suitable for touch screens; wet grip | |
| Protection category | II | |
| Overall length L | 250 mm | |
| Content | pair |
Identification & Classification
| Article number | 2229382 | |
| Catalog number | 094326 | |
| EAN / GTIN | 4069515064798 | |
| Manufacturer number | 094326 6 | |
| Article class | 01H | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Multi-purpose gloves with 18-gauge knit and a double coating of nitrile and sanded nitrile. The structured surface on the palm of the hand and fingers ensures a very good grip under oily conditions. Free of DMF.
MASTER FIT OIL+. The full nitrile coating is oil-tight and extends down past the wrist. Makes the glove particularly suitable for wet and oily working environments.
MASTER FIT OIL+. The full nitrile coating is oil-tight and extends down past the wrist. Makes the glove particularly suitable for wet and oily working environments.
Standard:
EN 407
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasions, blisters and cutting hazards.
- The gloves meet the requirements for puncture resistance; however, they are not suitable for protection against sharp objects such as injection needles.
- ‘Oil’ refers to suitability for use with common industrial oils (e.
- g.
- engine oil, mineral oil, lubricating oil) under normal working conditions.
- There is no protection against hazardous chemicals or aggressive oils.
- Optimum protection is obtained only when the area to be protected is completely covered.
- Where gloves have fastenings, check that these are securely closed.
- Protective gloves must not be allowed to slip.
- Select a suitable glove size.
Reasonably foreseeable misuse
- Not intended to provide protection against liquids or chemicals not specified on the glove.
- Do not use for work involving strong solvents, high temperatures or sharp-edged materials.
- Offer no protection against sharp objects.
- Offer no protection against chemical, microbiological, thermal or electrical hazards.
- Do not wear when close to rotating machine parts.
- Do not continue using gloves following contact with sharp-edged items.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.