{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of gloves Precision Cut D, Glove size: 6
Article no.: 2229495
Catalog no.: 094402
Article code:
Product details
Technical Data
| Series | Precision Cut | |
| Manufacturer’s designation | GARANT Precision Cut | |
| Heat-resistant up to | 100 degrees | |
| Contents pairs | 1 pair | |
| Cut protection class, EN 388 | D | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | X | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | 1 | |
| Resistance to cuts (TDM) | D | |
| Impact protection | not defined | |
| A: Behaviour when exposed to fire, EN 407 | X | |
| B: Contact heat, EN 407 | 1 | |
| C: Convection heat, EN 407 | X | |
| D: Radiated heat, EN 407 | X | |
| E: small molten spatters, EN 407 | X | |
| F: large molten spatters, EN 407 | X | |
| Material of coating, the palms of the hands | Nitrile | |
| EN 407 code | X1XXXX | |
| EN 388 code | 4X41D | |
| Colour | grey; black | |
| Type of product | gloves | |
| Area of application | heat protection; cut protection | |
| Glove size | 6 | |
| Scope of application | precision | |
| Reuse | reusable | |
| Unit | pair | |
| Standard | EN 388; EN 407; EN ISO 21420 | |
| Backing material | nylon | |
| Coating | the palms of the hands | |
| Lined | no | |
| Characteristics | reinforced crook of the thumb; suitable for touch screens | |
| Protection category | II | |
| Content | pair |
Identification & Classification
| Article number | 2229495 | |
| Catalog number | 094402 | |
| EAN / GTIN | 4069515064385 | |
| Manufacturer number | 094402 6 | |
| Article class | 01H | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
GARANT Precision Cut cut-resistant gloves with high cut resistance. Manufactured using 21-gauge knit, these GARANT gloves provide the best sense of touch to date – perfect for high-precision work. With reinforced thumb joint. Suitable for touch screens.
Cut resistance level D. With a fine nitrile coating and exceptionally good grip. Resistant to contact heat up to 100 °C.
Cut resistance level D. With a fine nitrile coating and exceptionally good grip. Resistant to contact heat up to 100 °C.
Standard:
EN 388; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- To protect against mechanical hazards, including abrasion, TDM cuts, lacerations and punctures to the palm of the hand in the workplace.
- The gloves meet the requirements for puncture resistance; however, they are not suitable for protection against sharp objects such as injection needles.
- For precision work with dry and oily workpieces.
- ‘Oily workpieces’ refers to suitability for use with common industrial oils (e.
- g.
- engine oil, mineral oil, lubricating oil) under normal working conditions.
- There is no protection against hazardous chemicals or aggressive oils.
- Optimum protection is obtained only when the area to be protected is completely covered.
- Where gloves have fastenings, check that these are securely closed.
- Protective gloves must not be allowed to slip.
- Select a suitable glove size.
Reasonably foreseeable misuse
- Offer no protection against chemical, microbiological or electrical hazards or naked flames.
- Do not use if there is a risk of being caught/drawn in by moving parts.
- Do not continue using gloves following contact with sharp-edged items.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.