{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SOMT 120508 PDER, for Softcut® HSI, HB7510-1
Article no.: 2230906
Catalog no.: 214876
Article code:
Product details
Technical Data
| Max. cutting depth ap | 6 mm; 10 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Cooling lubricant | yes | |
| Base form | square | |
| Thickness of insert S | 5.56 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 12.7 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 90 degrees | |
| Setting angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (flat cutting edge) | 15 degrees | |
| Normal clearance angle, main cutting edge | 15 degrees | |
| ISO-Code | SOMT 120508 PDER | |
| Attachment hole diameter | 4.5 mm | |
| Cutting depth ap, min. | 0.25 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.22 mm | |
| Feed rate per tooth max. fz | 0.22 mm | |
| Tool material | Cermet | |
| Machining group, manufacturer-specific | P | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | HB7520-1 | |
| Coating | PVD | |
| Grade | HB7520-1 | |
| Insert thickness T | 5.16 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SOMT1205 | |
| Insert designation | SOMT 120508 PDER | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 4 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 2230906 | |
| Catalog number | 214876 | |
| EAN / GTIN | 4069515060288 | |
| Manufacturer number | 214876 ST1400 | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
180
P
140
Description
Version:
Increased insert thickness for the highest metal removal rates. Protected against wear by the latest coating.
Note:
Standard application values for ae = 0.3×D.