{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Flexible pin jaw, rigid, Type: 125
Article no.: 2231148
Catalog no.: 363050
Article code:
New product
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Manufacturer’s designation | Flexible Pinbacke starr, Typ: 125 | |
| Jaw width B | 125 mm | |
| Jaw height H | 38 mm | |
| Jaw length L | 73 mm | |
| Clamping face | serrated; with Vee base | |
| Function | fixed | |
| Type of fastening | inserting/attaching | |
| Content | 1 pcs. | |
| Type of product | non-specific clamping jaws | |
| Material | steel | |
| Surface | burnished | |
| Weight | 2.05 kg | |
| Content | pieces |
Identification & Classification
| Article number | 2231148 | |
| Catalog number | 363050 | |
| EAN / GTIN | 4069515065290 | |
| Manufacturer number | 363050 125 | |
| Article class | 30N | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Top jaw coated and hardened with and without self-aligning pad. Available separately as “side A” or “side B”.
Application:
Available separately as replacement for the PIN top jaw pairs:
No. 363050 125/16 (side A) No. 36 050 125/18 (side B) No. 363051 125/16 (side A) No. 363051 125/18 (side B). The PIN top jaws must always be used as a set (consisting of “side A” and “side B”).
No. 363050 125/16 (side A) No. 36 050 125/18 (side B) No. 363051 125/16 (side A) No. 363051 125/18 (side B). The PIN top jaws must always be used as a set (consisting of “side A” and “side B”).
Suitable for:
Supplied with:
1 pc. PIN top jaw.
Note:
It is essential to observe the maximum permissible tightening torques depending on the clamping system being used. The tightening torque data shown on the top jaw applies exclusively to the XTRIC 125 centring vice.
Warning:
Intended use
Reasonably foreseeable misuse
- Designed for stationary use on machine tools in industrial indoor environments.
- Use only when technically in good condition and safe to operate.
- Use only if the system has been installed correctly and the safety devices and protective guards on the machine are in working order.
- Use only in enclosed spaces.
- For use with Xpent vices (type 1s, 1 2) and X-TRIC with / without a pivot function.
Reasonably foreseeable misuse
- Do not use in potentially explosive areas.
- Do not make any unauthorised modifications.
- Do not mount components that do not meet the specification.
- Do not operate outside of the operating parameters.
- Avoid clamping workpieces with long overhangs.
- Operation in decoupled state (side A and side B not connected).
- Use without Z-support.
- Inactive, unsecured pins – clamping forces are transferred to the housing – workpiece is not clamped correctly.
- Clamping without complying with the specified torque.