{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Highbond anchor FHB II-A S Inject M16 x 95/30 R
Article no.: 2241710
Catalog no.: 6093
Article code:
Product details
Technical Data
| Version | Mit Außengewinde | |
| With mortar cartridge | No | |
| Professional / DIY | Profi | |
| Application conditions | Damp area / Outside | |
| Material | Stainless steel | |
| Building material | cracked concrete | |
| Anchoring depth | 95 mm | |
| Max. thickness of the attachment | 30 mm | |
| Fire protection relevant | Yes | |
| Test marks / approvals | Fire classification | |
| Drill hole depth h1 | 101 mm |
Packaging units
| 1 Pack | 10 Pieces |
Identification & Classification
| Article number | 2241710 | |
| Catalog number | 6093 | |
| EAN / GTIN | 4048962273007 | |
| Manufacturer number | 539920 | |
| Article class | RMQ |
Description
Advantage:
- The Highbond system FHB II Inject achieves high load values in cracked concrete.
- The combination of injection mortar FIS HB and anchor rod FHB II-AS Inject R (short version) is ideally suited for serial installation outdoors.
- The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.
- When using hollow drills with extraction, no drill hole cleaning is required.
Application Area:
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15
- Guard rails
- Façades
- Staircases
- Steel constructions
- Masts
Application Notes:
- The FHB II-AS Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.
- The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.
- When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.