{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Highbond anchor dynamic FHB-A dyn 16 x 125/105 gvz
Article no.: 2241816
Catalog no.: 1875
Article code:
Product details
Technical Data
| With mortar cartridge | No | |
| Version | Mit Außengewinde | |
| Professional / DIY | Profi | |
| Material | Galvanised steel, steel grade 8.8 | |
| Anchoring depth | 125 mm |
Packaging units
| 1 Pack | 10 Pieces |
Identification & Classification
| Article number | 2241816 | |
| Catalog number | 1875 | |
| EAN / GTIN | 4048962439960 | |
| Manufacturer number | 562303 | |
| Article class | RMP |
Description
Advantage:
- During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.
- The cone shape of the FHB-Adyn anchor rod ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete.
- The anchor rod FHB-A dyn is also available made from highly corrosion-resistant steel. This makes it suitable for use in aggressive atmospheres, for example in tunnels.
- The Highbond anchor dynamic system can achieve even greater shear loads thanks to the additional sleeve of the anchor rod FHB-A dyn, and therefore provides an increased level of safety.
- The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchoring base steel fiber concrete.
Application Area:
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Steel fiber reinforced concrete (M12 / M16)
- Jib cranes
- Gantry and overhead cranes
- Guide rails for elevators
- Tunnel ventilators (jet fans)
- Gantries in road construction
- Antennas and transmitter masts
- Industrial robots
Application Notes:
- The injection system suitable for tensile zones consists of the Highbond dynamic anchor rod FHB-A dyn and the injection mortar FIS HB.
- FHB dyn is approved for pre-positioned and push-through installation.
- Extruding the mortar causes the two components to be mixed and activated in the static mixer.
- The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
- The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
- The lock nut prevents the nut from becoming loose.