{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High performance anchor FH II 12/M8 I with internal thread S
Article no.: 2241871
Catalog no.: 8473
Article code:
Product details
Technical Data
| Internal thread | M8 | |
| Professional / DIY | DIY | |
| With collar | No | |
| Number of nuts | 0 | |
| Anchor material | Steel | |
| Number of washers | 0 | |
| Material | Galvanised steel | |
| min. anchorage depth | 67 mm | |
| Packing | Blister card | |
| Drive | Hexagon socket | |
| Surface protection sleeve | Galvanic/electrolytic zinc plated | |
| Surface protection anchor | Galvanic/electrolytic zinc plated |
Identification & Classification
| Article number | 2241871 | |
| Catalog number | 8473 | |
| EAN / GTIN | 4048962218664 | |
| Manufacturer number | 532751 | |
| Article class | RMC |
Description
Advantage:
- The international approvals guarantee maximum safety and the best performance.
- The internal threaded anchor allows the removal of the attachment and the fixing point can be reused.
- The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
- The optimised geometry intelligently reduces the energy required for assembly.
- The approval regulates the use of hollow drills.
Supplied with:
2 x High performance anchor FH II 12/M8 I (internal thread)
1 x Setting tool
1 x Setting tool
Application Area:
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Pipeline routes
- Ventilation systems
- Sprinkler systems
Application Notes:
- The FH II-I is suitable for pre-positioned installation.
- When a hexagon wrench is used for installation, the internal thread bolt starts to rotate. This pulls the cone into the expansion sleeve and expands it against the drill-hole wall. At the same time, the anchor is tightened through compression of the black plastic ring. A gap U to the concrete surface is created (see image 4).
- The anchor is set according to the approval when the gap U is 3-5 mm. Alternatively, an installation torque of Tinst can also be applied.