{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Injection anchor sleeve FIS HK 16 x 130 K plastic bag
Article no.: 2241885
Catalog no.: 6101
Article code:
Product details
Technical Data
| Professional / DIY | Profi | |
| Anchor length | 130 mm | |
| Material | Plastic | |
| min. anchorage depth | 130 mm | |
| Packing | Polybag |
Identification & Classification
| Article number | 2241885 | |
| Catalog number | 6101 | |
| EAN / GTIN | 4006209445846 | |
| Manufacturer number | 044584 | |
| Article class | RMP |
Description
Advantage:
- The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus, FIS VLand FIS P Plus, and ensures sparing mortar use with the best interlock.
- The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters.
- The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation.
- The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation.
Supplied with:
8 x Injection anchor sleeve FIS HK 16 x 130 B
Application Area:
- Vertically perforated brick
- Hollow blocks made from lightweight concrete
- Hollow blocks made from concrete
- Perforated sand-lime brick
- Solid sand-lime brick
- Solid brick
- Hollow pumice slabs
- Slabs made of hollow brick and other perforated brick
- Solid pumice and other solid building materials
- Anchorings in perforated brick masonry with injection mortars FIS VL, FIS P Plus and FIS P
Application Notes:
- The system can be used with any of the following injection mortars:FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed,, FIS VL or FIS P Plus. FIS P can be used but does not have approvals.
- The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E.
- The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base.
- Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock.