{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Dynamic-Anchor FDA - A 12 x 100 / 25
Article no.: 2241975
Catalog no.: 6088
Article code:
New product
Product details
Technical Data
| With mortar cartridge | No | |
| Version | Mit Außengewinde | |
| Professional / DIY | Profi | |
| Application conditions | Inside | |
| Material | Galvanised steel, steel grade 8.8 | |
| Building material | cracked concrete | |
| Anchoring depth | 100 mm | |
| Test marks / approvals | DIBt approval |
Packaging units
| 1 Pack | 10 Pieces |
Identification & Classification
| Article number | 2241975 | |
| Catalog number | 6088 | |
| EAN / GTIN | 4048962252941 | |
| Manufacturer number | 536943 | |
| Article class | RMP |
Description
Advantage:
- Medium load level for a variety of applications.
- Pre-assembled anchor rod for fast installation.
- Assessed safety acc. to ETA.
- Easy push-through installation leads to cost effectiveness – especially for serial installations.
- Tight assortment with the size.
- Less spacings and edge distances.
- Drill holes are sealed.
- The ETA for static and quasi-static loads allows the use also for the anchoring base steel fiber concrete.
Application Area:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Steel fiber reinforced concrete
- Hydraulic ramps
- Conveyor belts
- Industrial robots
- Cooperation robots and -parts
- Guide rails for elevators
Application Notes:
- The injection system suitable for tensile zones consists of the fischer dynamic anchor rod FDA-A dyn and the injection mortar FIS HB.
- FDA is approved for push-through installation.
- Extruding the mortar causes the two components to be mixed and activated in the static mixer.
- The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
- The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
- During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.