{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
TermoZ CNplus 8/390
Article no.: 2242511
Catalog no.: 5951
Article code:
Product details
Technical Data
| Professional / DIY | Profi | |
| Anchor length | 390 mm | |
| min. anchorage depth | 35 mm | |
| Packing | Folding box | |
| Drive | TX25 | |
| Anchoring depth | 35 mm |
Packaging units
| 1 Pack | 100 Pieces |
Identification & Classification
| Article number | 2242511 | |
| Catalog number | 5951 | |
| EAN / GTIN | 4048962278637 | |
| Manufacturer number | 540390 | |
| Article class | RMH |
Description
Advantage:
- TermoZ CNplus is a hammerset anchor with the option to be screw set. The plug is suitable for all building material and insulation types. Through the flexible use the warehouses and ordering processes are reduced.
- With the fast and simple hammerset installation the plugs set too deep can be readjusted with the aid of the screwdriver. This saves working time and helps to avoid fixing marks.
- During the screw installation the TermoZ CNplus can be set countersunk or flush. For different set results only one plug is required.
- Moreover the screw installation enables an accurate setting due to an optimum application on the insulation surface. Also with soft insulation.
- The compound nail ensures a high energy efficiency with the countersunk screw installation, because there is nearly no heat transmission.
Application Area:
- Building material classes A, B, C, D, E
- Concrete
- Full blocks made from concrete
- Building brick
- Solid sand-lime brick
- Hollow blocks made from lightweight concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Lightweight aggregate concrete
- Aerated concrete
- Attachment of ETICS insulating boards on concrete and masonry
- Flush installation in ETICS insulating boards, e.g. polystyrene and mineral wool
- Countersunk installation in ETICS insulating boards, e.g. polystyrene and mineral wool, incl. a closing cap for covering
Application Notes:
- The plug is set in push-through installation.
- Simple, fast setting by driving the compound nail in using a standard hammer.
- The setting process with the screwdriver is performed flush with a standard Bit T 25.
- For countersunk installation the setting tool CNplus is required. The insulation disk is covered with a closing cap.
- Non-load bearing layers, such as adhesive and old plaster, are included in the maximum useful length.