{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
TermoZ PN 8/110
Article no.: 2242544
Catalog no.: 5953
Article code:
Product details
Technical Data
| Professional / DIY | Profi | |
| Anchor length | 110 mm | |
| min. anchorage depth | 35 mm | |
| Packing | Folding box | |
| Max. thickness of the attachment | 70 mm |
Identification & Classification
| Article number | 2242544 | |
| Catalog number | 5953 | |
| EAN / GTIN | 4048962073140 | |
| Manufacturer number | 506325 | |
| Article class | RMH |
Description
Advantage:
- Due to the special architecture of the fixing, small drill hole depths are possible.
- The crumble zone allows an exact washer penetration.
- The asymmetric expansion element ensures a perfect anchoring even in hollow and problem substrates.
- The innovative shank and the special geometry of the nylon nail minimize the failure tendency significant particularly in full substrates.
- The washer thickness of only 2.5 mm allows thin and economic reinforcement layers.
- Due to the nylon nail the TermoZ PN provides nearly no thermal bridging and helps saving energy.
- Can be combined with insulation retaining washers DT 90, 110 and 140 mm.
Application Area:
- Building material classes A, B, C, D, E
- Concrete
- Building brick
- Solid sand-lime brick
- Hollow blocks made from lightweight concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Lightweight aggregate concrete
- Aerated concrete
- Attachment of ETICS insulating boards on concrete and masonry
- Flush-to-surface installation in ETICS insulating materials e.g. polystyrene and mineral wool
Application Notes:
- Hammerset fixing for the mounting of ETICS-Systems with Polystyrene board or insulation boards in concrete and masonry.
- Per hammering in the preassembled plastic nail with a hammer the fastener will be fixed in the substrate.
- Embedment depth of min 35 mm in the substrate is needed.
- Non load bearing layers such as adhesives and old render are to be included in the required useful length.