{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
ETICS screw fixing TermoZ 6H 200
Article no.: 2242592
Catalog no.: 5950
Article code:
Product details
Technical Data
| Anchor length | 200 mm | |
| min. anchorage depth | 24 mm | |
| Drive | TX30 | |
| Anchoring depth | 24 mm |
Packaging units
| 1 Pack | 100 Pieces |
Identification & Classification
| Article number | 2242592 | |
| Catalog number | 5950 | |
| EAN / GTIN | 4048962345544 | |
| Manufacturer number | 548484 | |
| Article class | RMH |
Description
Advantage:
- The pre-assembled ETICS fixing guarantees safe fixing into the substrate.
- The special geometry under the head of the anchor roughens the surface during the setting process and provides a torque-reduced penetration into the insulation.
- The use of the setting tool 6H enables a clean fixing. Optionally, the setting tool TermoZ CS can be used in combination with a special bit.
- The minimum screw-in depth of 24 mm provides quick installation. Pre-drilling is not necessary.
- For insulating material thicknesses up to 300 mm.
- The national approval for wooden substructures is applied for.
Application Area:
- MDF boards
- OSB boards
- Chipboard
- Gypsum fibreboard
- Solid wood
- Attachment of ETICS insulating boards on wooden substructures.
- Flush installation in ETICS insulating materials e.g. polystyrene and mineral wool.
- Flush-to-surface installation in pressure-resistant insulation boards.
Application Notes:
- The special setting tool 6H is used for countersunk installation. This setting tool enables a precise positioning and fast installation of the fixing. The countersunk hole is covered with a suitable insulation closing plug which ensures a homogeneous surface.
- By rotating the disc of the setting tool 6H by 180°, it can be used for the flush-to-surface installation. This allows the exact positioning of the anchor plate on the insulation surface. The screw opening is covered by the included plug.