{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Expansion plug S 16
Article no.: 2242795
Catalog no.: 6501
Article code:
Product details
Technical Data
| With screw | No | |
| Suitable for wood | No | |
| Suitable for perforated brick | No | |
| Suitable for calcium silicate brick | Yes | |
| Suitable for solid brick | Yes | |
| Material | Nylon | |
| Building material | Solid building material | |
| Drive | without | |
| Suitable for hexagon wood screw | Yes | |
| Suitable for natural stone | Yes | |
| Suitable for aerated concrete | No | |
| Suitable for fastening with cable ties | No | |
| Suitable for plasterboard | No | |
| Colour | grey | |
| Suitable for concrete | Yes | |
| Suitable for aerated concrete | No | |
| Chipboard/wood screws | 12 (1/2") mm | |
| Packing | Blister card | |
| Version | Ohne Schraube | |
| d0 | 16 mm | |
| Material grade | Nylon | |
| With edge | No | |
| Professional / DIY | Profi | |
| Anchor length | 80 mm | |
| Suitable for chipboard | No | |
| Surface protection | Other |
Identification & Classification
| Article number | 2242795 | |
| Catalog number | 6501 | |
| EAN / GTIN | 4048962503524 | |
| Manufacturer number | 570116 | |
| Article class | RME |
Description
Advantage:
- The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity.
- As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances.
- The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation.
- The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety.
Supplied with:
2 x Expansion plug S 16
Application Area:
- Concrete
- Solid sand-lime brick
- Natural stone with dense structure
- Solid brick made from lightweight concrete
- Solid brick
- Pictures
- Lighting
- Letter boxes
- Motion detectors
- Information boards
- Curtain rails
- Electrical installations
Application Notes:
- The expansion plug S is suitable for pre-positioned and push-through installation.
- When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material.
- The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter.
- Suitable for wood and chipboard screws.
- The edge distance must be at least one plug length.
- For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge.