{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Rail SolarFish H33 3.65 m AL black aluminium
Article no.: 2242934
Catalog no.: 8427
Article code:
Product details
Technical Data
| Professional / DIY | Profi |
Identification & Classification
| Article number | 2242934 | |
| Catalog number | 8427 | |
| EAN / GTIN | 8001132119594 | |
| Manufacturer number | 572451 | |
| Article class | QNF |
Description
Advantage:
- The cross-section with reduced height optimizes the structure for installations with reduced distance between the supports.
- The side groove and the lower groove are compatible with the quick couplings of the GTA hooks or with SKS M8 screws or RHS hammer head screws.
- The 3 available sizes reduce waste and facilitates handling on site.
Application Area:
- All kinds of picthed and flat roofs.
Application Notes:
- Identify the correct support system based on the type of roof (e.g., flat tile hooks, barrel tile hooks, triangular frames for flat roofs, standing seam clamps, etc).
- Determine the centre distance of the fastenings according to snow and wind loads (use SOLARPANEL-FiX software to design the system).
- Assemble the SolarFish H33 AL rail on the selected support through the lower or the side grooves.
- To connect two SolarFish H33 AL rails, install a SolarFish H33 AL connector centering it between the two rails and complete the installation though RHS 8 screws.
- To limit thermal expansion, it is advisable to create series of rails connected to each other up to a maximum length of 15 m. Beyond this measure it is necessary to interrupt the structure and start again with a new rail disconnected from the previous ones.
- Install the clamps through the upper groove of the rail. The SolarFish H33 AL rail is compatible with all kinds of fischer clamps.
- Fix the PV panels by tightening the clamps.