{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Metal cavity fixing HM 4 x 46 S with screw (4)
Article no.: 2242944
Catalog no.: 5709
Article code:
Product details
Technical Data
| Version | con vite | |
| With screw | Yes | |
| Professional / DIY | DIY | |
| Anchor length | 46 mm | |
| With thread | Yes | |
| Surface protection | Galvanic/electrolytic zinc plated | |
| Building material | Panel building material | |
| Drive | PH2; Phillips PH | |
| Packing | Blister card | |
| Panel thickness | 16 - 23 mm |
Identification & Classification
| Article number | 2242944 | |
| Catalog number | 5709 | |
| EAN / GTIN | 4006209493922 | |
| Manufacturer number | 049392 | |
| Article class | RME |
Description
Advantage:
- Due to the extensive range, the HM is suitable for board building materials with a thickness of 3-50 mm and thus suitable for a number of different applications.
- The metric internal thread allows the attachment to be removed and refitted several times, thus offering the best possible flexibility.
- The HM's expanding arms ensure a large supporting surface, thus allowing a high load-bearing capacity.
- The claws around the edge of the fixing penetrate the board building material, preventing the fixing from rotating, thus ensuring a secure installation.
Supplied with:
4 x Metal cavity fixing HM 4 x 46
4 x Screw M4 x 52
4 x Screw M4 x 52
Application Area:
- Gypsum plasterboard and gypsum fibreboards
- Cavity floor slabs
- Light building boards made of wood wool
- Chipboard
- Plywood boards
- Light shelves
- Mirror cabinets
- Sub-structures
Application Notes:
- The metal cavity fixing HM is suitable for pre-positioned installation.
- The fixing should be selected based on the thickness of the board building material, to allow the very best expansion in the cavity.
- During installation, the expanding arms swing open and press onto the reverse side of the board.
- The HM can be installed using installation pliers. If using a battery operated screwdriver or screwdriver for installation, the pre-assembled screws must be removed first. When screwing in and expanding the fixing, the attachment, or a max. 6 mm plate, needs to be used as a turning stop.