{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Bit holder plug-in head, Type: 1
Article no.: 224851
Catalog no.: 657930
Article code:
Product details
Technical Data
| Series | 736 | |
| Manufacturer’s designation | Bit-Halter-Einsteckwerkzeug, Typ: 1 | |
| Pitch S | 17.5 mm | |
| Manufacturing process | drop forged | |
| Drive size, slotted mount (rectangular) | 9×12 | |
| Size of drive output, bit holder | 5/16 inch | |
| Type of product | plug-in head | |
| Material | chromium alloy steel | |
| Surface | chromium-plated over nickel | |
| Standard | DIN ISO 1173 | |
| Set | no | |
| Drive | slotted mount (rectangular) | |
| Output drive | bit holder | |
| Content | single part |
Identification & Classification
| Article number | 224851 | |
| Catalog number | 657930 | |
| EAN / GTIN | 4018754103911 | |
| Manufacturer number | 58261010 | |
| Article class | 63A | |
| Manufacturer/responsible person | STAHLWILLE Eduard Wille GmbH, Lindenallee 27, 42349 Wuppertal, Germany, https://www.stahlwille.de |
Description
Version:
Drop-forged; all plug-in heads = Rectangular shank with spring retaining pin. This ensures a solid and secure fit of the plug-in head in the torque wrench.
Application:
To take bits with hexagon shank to DIN ISO 1173 C 8 (5/16 inch).
Material:
Chrome alloy steel, non-flaking, chrome-plated over nickel.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Suitable for:
Torque wrench with rectangular sockets.
Note:
The rated load on this plug-in head is limited to the corresponding jaw width, and may be less than that of the torque wrench.
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!