{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Electrician’s screwdriver for slot-head, with Kraftform handle VDE fully insulated, Blade width b: 2,5mm
Article no.: 224951
Catalog no.: 663100
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Offers
Product details
Technical Data
| Tested up to | 1,000 V | |
| Manufacturer’s designation | 160 i VDE | |
| Quality and test seal | VDE | |
| ESD protected area (EPA) | no | |
| Colour | yellow; red | |
| Version | straight | |
| Suitable for voltage testing | no | |
| Blade length | 80 mm | |
| Handle properties | ergonomic; non-slip | |
| Type of handle | standard handle | |
| Handle length | 81 mm | |
| Non-roll flats | yes | |
| With swivel jointed head, for slotted screws (SL) | no | |
| Special features, for slotted screws (SL) | black tip | |
| Blade width | 2.5 mm | |
| Type of product | screwdriver | |
| Material | special steel / special alloy | |
| Surface | matt chrome-plated | |
| Standard | DIN EN 60900; VDE 0682-201 | |
| Overall length | 161 mm | |
| Set | no | |
| Drive | handle | |
| Output drive | for slotted screws (SL) | |
| Content | single part |
Identification & Classification
| Article number | 224951 | |
| Catalog number | 663100 | |
| EAN / GTIN | 4013288027221 | |
| Manufacturer number | 05006100001 | |
| Manufacturer/responsible person | Wera Werkzeuge GmbH, Korzerter Straße 21-25, 42349 Wuppertal, Germany, www.wera.de |
Description
Version:
Handle and blade fully insulated up to 1000 V to DIN EN IEC 60900 / VDE 0682-201.
Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Blades with taper tips, manufactured to the standard dimensions of slots on the screws. Fully insulated, the breakdown strength of the insulation is many times the minimum test voltage set by VDE. Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Kraftform handle made of impact resistant plastic with integral soft zones facilitates torque transmission and thus protects hand and arm.
Blade of high-alloy special steel. Nicromatt chrome-plated surface, black tips or chemically nickel-coated Lasertip tips (as from size 4). From size 5.5 the outside ⌀ of the insulation is the same as the tip width (helpful when working in narrow spaces).
Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Blades with taper tips, manufactured to the standard dimensions of slots on the screws. Fully insulated, the breakdown strength of the insulation is many times the minimum test voltage set by VDE. Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Kraftform handle made of impact resistant plastic with integral soft zones facilitates torque transmission and thus protects hand and arm.
Blade of high-alloy special steel. Nicromatt chrome-plated surface, black tips or chemically nickel-coated Lasertip tips (as from size 4). From size 5.5 the outside ⌀ of the insulation is the same as the tip width (helpful when working in narrow spaces).
Application:
For use at voltage up to 1000 V.
Optimum working life for electrician’s screwdrivers is assured if screwdrivers always exactly match the standard screw slot size. (see tables part). Incorrect screwdriver size selection will cause damage to the screw head.
Optimum working life for electrician’s screwdrivers is assured if screwdrivers always exactly match the standard screw slot size. (see tables part). Incorrect screwdriver size selection will cause damage to the screw head.