{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Electronic torque analyser “Pro-Test 3”, maximum torque: 60N·m
Article no.: 2250225
Catalog no.: 654461
Article code:
Product details
Technical Data
| Min. torque | 1.2 Nm | |
| Max. torque | 60 Nm | |
| Series | Pro-Test 3 | |
| Manufacturer’s designation | Pro-Test 3 | |
| Packaging | case | |
| Power supply | mains-powered | |
| Index torque | 1 | |
| Torque measuring accuracy | 0.5 % | |
| Display unit | yes | |
| Display unit length | 70 mm | |
| Display unit width | 203 mm | |
| Display unit height | 149 mm | |
| Holder | external hexagon drive | |
| Direction of tightening | right-hand | |
| Accuracy ± | 0.5 % | |
| with printer | no | |
| Type of product | torque tester | |
| Overall length | 164 mm | |
| Overall width | 187 mm | |
| Overall height | 98 mm | |
| Standard | DIN EN ISO 6789 | |
| Test certificate | yes | |
| Interface | USB | |
| With display | yes | |
| Display type | LCD; Touchscreen | |
| Storage of measured values | yes | |
| Number of memory location values | 2’000 pcs. | |
| Can be calibrated | yes |
Identification & Classification
| Article number | 2250225 | |
| Catalog number | 654461 | |
| EAN / GTIN | 2000001228623 | |
| Article class | 66D |
Description
Version:
- Large-format colour LCD touchscreen.
- User-specific input of target torque with upper and lower tolerances; acoustic and visual signal (colour display) on reaching/exceeding the target torque.
- 3 user modes: Following, inflection point detection, and peak value display.
- 12 display languages.
- Testing in horizontal and vertical position.
- Display and measured value sensor can be separated.
- The display and measurement sensor are permanently connected to one another via a durable cable.
- The 1-inch RAM mount interface allows the display to be positioned at any desired viewing angle.
- Up to 150 test sequences can be saved.
- Internal memory for 2,000 measured values, which can be downloaded later to generate a certificate.
- Can measure the rate of rise – an important parameter for the ISO 6789:2017 standard.
- Includes the new TestSync software for efficiently downloading, analysing and printing measurement results.
Application:
For setting and calibrating torque tools.
Accuracy:
Corresponds to BS 7882:2017, Class 1 or better in the main calibration range (20 to 100% of the measuring range) and Class 2 or better in the lower calibration range (below 20% of the measuring range). Class 1 corresponds to ±0.5% of the measured value.
Supplied with:
Measured value sensor, display unit, USB power supply unit, USB-C cable, fastening screws and socket in a sturdy case, including UKAS calibration certificate, right-hand.