{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Komet KUB Trigon® indexable drill with combination shank, for indexable inserts WOEX
Article no.: 228219
Catalog no.: 236630
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Series | KUB Trigon® | |
| Manufacturer’s designation | KOMET KUB Trigon® Wendeplatten-Vollbohrer | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL02501415 | |
| Shank diameter DS | 25 mm | |
| Length of shank LS | 56 mm | |
| Cutter diameter, min. Dc | 22 mm | |
| Number of cutting edges, total | 1 | |
| Twist angle | 25 degrees | |
| Angle, 1st step | 180 degrees | |
| Guide elements | without guide elements | |
| Interface coding for insert | WO0403043N | |
| Insert designation | WOEX 040304 18-... | |
| Interface | joint 1 | |
| Gauge length A | 90 mm | |
| Usable length L1 | 66 mm | |
| Overall length L | 146 mm | |
| Weight | 350 g | |
| Cutting direction | right-hand cutting | |
| Machining method | drilling into solid material (BVB) | |
| Type of product | indexable drill for cutter inserts | |
| Maximale Verstellgrenze V | 0.5 mm | |
| Bohrtiefe für Wendeplattenbohrer bis | 3×D |
Identification & Classification
| Article number | 228219 | |
| Catalog number | 236630 | |
| EAN / GTIN | 4047109100213 | |
| Manufacturer number | V44 72202 | |
| Article class | 24P | |
| Manufacturer/responsible person | Ceratizit Besigheim GmbH, Zeppelinstraße 3, 74354 Besigheim, Germany, www.kometgroup.com |
Description
Version:
- Special manufacturing procedure for extremely large flutes with very high rigidity.
- Specific positioning of the indexable inserts for bores free of withdrawal marks and with precise dimensional stability (± 0.1 mm as a rule).
- Internal coolant supply is directed to the cutting edges (sophisticated geometry, ideal for minimum lubrication).
- 3 − 10 bar coolant pressure is sufficient.
- For stationary and rotating applications.
- Offset-axis drilling: dependent on ⌀ up to 1.5 mm.
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
- Note! A disc falls off when the drill exits. Risk of injury if the component is rotating! Please take safety precautions.
- On request − left-hand cutting; − 2×D, − other ⌀; − special types − torsional vibration damper for ABS giving low-vibration machining, with maximum tool life and minimum noise level.