{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Revolving lathe centre 60°, Morse taper: 1
Article no.: 230874
Catalog no.: 320660
Article code:
Product details
Technical Data
| Overall length L | 114.2 mm | |
| Head diameter D | 34.5 mm | |
| Type of centring point | tracking | |
| Point angle α | 60 degrees | |
| Largest point diameter D1 | 15 mm | |
| Bull-nosed taper at front | no | |
| Usable length L2 | 60.5 mm | |
| Mounting machine-side | MK1 | |
| With push-off thread | no | |
| With clamping faces | no | |
| With carbide tip | no | |
| With shock absorbing | no | |
| Max. workpiece weight | 100 kg | |
| Maximum radial run-out | 0.005 mm | |
| Half centring point | no | |
| Replaceable centring points included | no | |
| With pressure indicator | no | |
| Use | turning | |
| Weight | 0.4 kg | |
| Type of product | centring drill |
Identification & Classification
| Article number | 230874 | |
| Catalog number | 320660 | |
| EAN / GTIN | 4019208014418 | |
| Manufacturer number | 043400 | |
| Manufacturer/responsible person | Röhm GmbH, Heinrich-Röhm-Straße 50, 89567 Sontheim/BRZ, Germany, www.roehm.biz |
Description
Version:
- Body and live centre hardened.
- Live centre through hardened, multiple regrinding possible.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- Point angle 60°.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For all types of lathe, equally suitable for roughing and finish turning.