{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap Form B, vaporised, M: M2,6
Article no.: 231571
Catalog no.: 132150
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Maschinen-Gewindebohrer Form B M M2,6 | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00282105 | |
| Shank diameter DS | 2.8 mm | |
| Shank length LS | 38 mm | |
| Thread type | M | |
| Thread nominal diameter metric D | 2.6 mm | |
| Thread D | M2,6 | |
| Thread pitch | 0.45 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Chisel edge diameter | 2.08 mm | |
| Length of tapping part Lc | 12 mm | |
| Tap infeed length | 1.35 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 2 | |
| Twist direction | neutral, straight | |
| Twist angle | 0 degrees | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | B | |
| Cutting part version | with lubrication groove and dirt trap groove | |
| Application for type of drilling | through hole | |
| To depth (x diameter) | 3 | |
| Number of clamping slots | 2 | |
| Core hole diameter | 2.1 mm | |
| Flank angle | 60 degrees | |
| Square-drive width across flats □ | 2.1 mm | |
| Tool material | HSS-E | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Coating | vaporised | |
| Interface | joint 1 | |
| Gauge length A | 50 mm | |
| Overall length L | 50 mm | |
| Weight | 5 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 371 | |
| Colour ring | blue | |
| Type of product | taps |
Identification & Classification
| Article number | 231571 | |
| Catalog number | 132150 | |
| EAN / GTIN | 4045197071125 | |
| Manufacturer number | 132150 M2,6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
13
P
15
P
15
P
15
M
6
N
13
Description
Version:
Particularly sturdy design.
Guide section with oil grooves, but without chip flutes. Lead chamfer form B, with strong spiral point. Size M2.6 to the old DIN profile.
Guide section with oil grooves, but without chip flutes. Lead chamfer form B, with strong spiral point. Size M2.6 to the old DIN profile.
Advantage:
Optimum self-guidance and no recutting when reversed.