{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Semi-roughing end mill, TiAlN, ⌀ k12 DC: 8mm
Article no.: 233079
Catalog no.: 191720
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Max. cutting depth, Full slot milling | 8 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.018 mm | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01001005 | |
| Holder version | metric | |
| Holder size, metric | 10 mm | |
| Dry machining | suitable only under restricted conditions | |
| Type of mounting | spigot | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 10 mm | |
| Shank type | HB | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Schruppschlichtfräser | |
| Tool material | HSS Co 8 | |
| Machining group | M (stainless steel); P (steel) | |
| Cutter diameter Dc | 8 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | k12 | |
| Cutting edge length Lc | 19 mm | |
| Number of effective cutters (peripheral side) Z | 4 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Corner / edge | 1 | |
| Corner chamfer angle | 90 degrees | |
| Shape identifier, manufacturer-specific | NF | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 4 | |
| Cutting media, manufacturer’s designation | HSS-CO8 TIALN | |
| Vorschub pro Zahn in | steel < 750 N/mm2 | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Tolerance class | k12 | |
| Overall length L | 69 mm | |
| Weight | 38 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 844 B | |
| Shape letter standard number | B | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | without | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling |
Identification & Classification
| Article number | 233079 | |
| Catalog number | 191720 | |
| EAN / GTIN | 4045197104922 | |
| Manufacturer number | 191720 8 | |
| Article class | 11W | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
120
P
78
P
55
P
55
M
17
M
14
K
46
N
92
Description
Version:
Size 10 − 30 centre cutting teeth for plunging.
or a considerable performance improvement with special ground chip breaker flutes.
or a considerable performance improvement with special ground chip breaker flutes.
Advantage:
The chip breaker flutes facilitate chip evacuation and at the same time ensure a good component surface finish.